Honeywell Home product training
Learn all there is to know about our range of Honeywell Home products, including installation, setup and configuration.
Face-to-face training courses
Unfortunately, as a business, we need to mitigate the risk surrounding the fast-changing situation with the coronavirus, so all face to face training has been postponed until further notice.
However, we are hosting a number of FREE ONLINE TRAINING WEBINARS as an alternative. If your chosen course isn't available, please contact installer.training@resideo.com
Introduction to heating controls: 1-day course *POSTPONED*
This course is designed for those wishing to obtain a greater understanding of common central heating control systems. It provides knowledge of systems utilising Honeywell Home Sundial S and Y Plan systems, including installation good practice and fault diagnosis.
£75 (excl. VAT) attendance fee only – no additional costs
Who should attend?
Beginners wishing to progress in this field. No previous experience required.
This course covers
Guidance on electrical safety and best practice.
The principal function of system components on a heating system.
How to understand and utilise the Honeywell wiring guide.
Operation of practical wiring and applications for a 2-port valve (S Plan) system.
Practical wiring and applications for a 3-port valve (Y Plan) system.
Control system commissioning and testing.
Diagnosing and rectifying common control system faults.
CHECK AVAILABILITY"All round good course. Everyone in the class benefited and I would recommend this course to anyone in plumbing."
Henley Heating Ltd
Smart heating controls: 1-day course *POSTPONED*
This course is designed as a follow-on from the ‘Introduction to Heating Controls’ course, and is intended for installers wishing to learn more about selecting appropriate heating controls depending on different applications.
Run by one of our technical specialists, this course includes connected and non-connected controls and additional smart devices. It also gives an insight into smart homes and the technologies behind them, and the Honeywell Home products designed to work in them.
£75 (excl. VAT) attendance fee only
or
£99 (excl. VAT) and get a Honeywell Home T6R-HW Wireless Smart Thermostat with Hot Water Control (RRP £220)
Who should attend?
Installers with an understanding of domestic heating system controls. Attendance on the ‘Introduction to Heating Controls’ course, or equivalent training is advisable but not essential. Practical experience of installing and maintaining heating controls is an advantage.
This course covers
An overview of heat sources, systems and control strategies.
In-depth training and an introduction to OpenTherm, load compensation and modulating control – what it is, what it is not, benefits and capabilities.
Thermostat applications including Honeywell Home T3, T4 and T6 series, RF2 packs and evohome. Single, two-zone and multi-zoning. Stored hot water contro land application options.
An overview of security and awareness products, including smart cameras, whole house security, water leak detection and other environmental sensors.
Smart home integration and creating scenes, voice control and geo-fencing. Smart assistant speakers, third-party platforms and ‘Works with Honeywell’ integration.
CHECK AVAILABILITY"Thank you for all the time and effort you took to organise and carry out the training. It was hugely appreciated by both of us and I’m sure will be extremely valuable.
Orange Glow Energy
evohome installer training: 1-day course *POSTPONED*
This course is designed for those wishing to acquire an in-depth knowledge of how to install, configure and fault-find on Honeywell Home evohome systems. This is run by one of our evohome technical specialists. It covers pre-installation site surveys, installation good practice, and customer hand over.
£75 (excl. VAT) attendance fee only
or
£200 (excl. VAT) and get a Honeywell Home evohome controller and 4-pack of Honeywell Home evohome radiator controllers
Who should attend?
Installers with a good understanding of domestic heating system controls. Attendance on the ‘Introduction to Heating Controls’ course, or equivalent training, plus practical experience of installing and maintaining heating controls, is preferable.
This course covers
The features and applications of evohome.
The principles of and considerations for multi-zoning.
The evohome system components and how they are configured.
Upgrading existing S & Y plan, and combi systems.
How to install/upgrade systems to OpenTherm and hot water priority control.
Achieving a good installation.
Commissioning and testing the system.
Connecting to evohome via the Honeywell app.
Diagnosing and rectifying system faults.
Becoming a ‘Connected Specialist’.
The evohome system is one of the most comprehensive systems you can fit. Learn how to get the best out of this powerful heating control system.
CHECK AVAILABILITY